Honda Odyssey XM Radio Satellite Installation Procedures

1. Determine on a location on the Honda Odyssey’s dashboard that’s suitable on your XM Satellite Radio receiver‘s vent clip or adhesive mount. This should be inside comfortable arm’s attain of the motive force’s seat. Be sure that the mount and receiver combination doesn’t impede the driving force‘s imaginative and prescient in any direction.
2. Set up the XM Satellite Radio receiver‘s mount. Insert the vent clip into a nearby vent in order that it connects to a horizontal blade. Alternatively, you may take away the sticker from the adhesive mount’s base and press it onto a clean, flat surface on the Honda Odyssey‘s dashboard. Use the alcohol prep pad included in the XM automotive installation package to clean the mounting floor, and permit the mount to dry undisturbed for at least 24 hours.
3. Connect the antenna included in the XM car installation equipment onto the Honda Odyssey’s roof. Slip the antenna’s cable into the climate stripping on the Honda Odyssey’s rear door. Open the rear door and run the cable into the climate stripping down to the passenger area floor. Run the antenna cable under the carpet and as much as the dashboard space where your receiver’s mount is located.
4. Join the XM Satellite Radio receiver’s docking cradle to the mount. You possibly can slide the cradle onto the mount.
5. Insert the XM Satellite Radio receiver into the related docking cradle. Doing so connects the receiver to energy and signal.
6. Insert the antenna cable jack in the XM Satellite Radio receiver’s “Antenna” port. The port might also be labeled “ANT”.
7. Insert the XM automobile set up package energy adapter into the Honda Odyssey‘s cigarette lighter. Insert the ability adapter’s jack into the “PWR” or “5V DC” port on the docking cradle.
8. Insert one finish of the audio adapter cable included within the XM car set up kit in the docking cradle’s “Line Out” port. Insert the opposite finish of the cable in the “Line In” port on the Honda Odyssey’s stock radio. Alternatively, you could purchase an XM cassette adapter and insert its tape-formed end into the vehicle’s tape player. Connect the cassette adapter to the docking cradle’s “Line Out” port the identical way you would the audio adapter cable.<0>